Number of independent MPP trackers/strings per MPP tracker
2/1
2/1
2/1
2/1
Output (AC)
Rated AC output power
3000W
4000W
5000W
6000W
Max. AC apparent power
3000VA
4000VA
5000VA
6000VA
Max. output current
5.1A
6.8A
8.5A
10.2A
AC nominal voltage
230V/400V;320-478V
230V/400V;320-478V
230V/400V;320-478V
230V/400V;320-478V
AC grid frequency
50Hz/60Hz,±5Hz
50Hz/60Hz,±5Hz
50Hz/60Hz,±5Hz
50Hz/60Hz,±5Hz
Power factor
0.8leading - 0.8laging
0.8leading - 0.8laging
0.8leading - 0.8laging
0.8leading - 0.8laging
THDi
<3%
<3%
<3%
<3%
AC grid connection type
3W+N+PE
3W+N+PE
3W+N+PE
3W+N+PE
Efficiency
Max.efficiency
97.5%
97.8%
98.0%
98.0%
Euro - eta
96.5%
96.7%
96.9%
97.1%
MPPT efficiency
99.5%
99.5%
99.5%
99.5%
Protection Devices
DC reverse polarity protection
yes
yes
yes
yes
DC switch
yes
yes
yes
yes
Output over current protection
yes
yes
yes
yes
Output AC overvoltage Protection - Varistor
yes
yes
yes
yes
Ground fault monitoring
yes
yes
yes
yes
Grid monitoring
yes
yes
yes
yes
Integrated all-pole sensitive
yes
yes
yes
yes
leakage current monitoring unit
yes
yes
yes
yes
General Data
Dimensions (W / H / D) in mm
480/448/200
480/448/200
480/448/200
480/448/200
Weight
21.2kg
21.2kg
21.2kg
21.2kg
Operating temperature range
-25 °C ... +60 °C
-25 °C ... +60 °C
-25 °C ... +60 °C
-25 °C ... +60 °C
Noise emission (typical)
≤35 dB(A)
≤35 dB(A)
≤35 dB(A)
≤35 dB(A)
Altitude
3000m
3000m
3000m
3000m
Self-consumption night
< 0.5W
< 0.5W
< 0.5W
< 0.5W
Topology
Transformerless
Transformerless
Transformerless
Transformerless
Cooling concept
Natural
Natural
Natural
Natural
Environmental Protection Rating
IP65
IP65
IP65
IP65
Relative humidity
0~100%
0~100%
0~100%
0~100%
Features
DC connection
H4/MC4(opt)
H4/MC4(opt)
H4/MC4(opt)
H4/MC4(opt)
AC connection
Connector
Connector
Connector
Connector
Display
LCD
LCD
LCD
LCD
Interfaces:RS232/RS485/RF/ Ethernet/Wi-Fi
yes/yes/opt/opt/opt
yes/yes/opt/opt/opt
yes/yes/opt/opt/opt
yes/yes/opt/opt/opt
Warranty:5 years/10 years
yes/opt
yes/opt
yes/opt
yes/opt
CE, IEC 62109-1/2, VDE 0126-1-1, Greece, UTE C 15-712, VDE-AR-N4105, G98, EN50438, CEI 0-21, AS4777, IEC 61727, IEC 62116, CQC
Quick Installation
Introduction
TL3-S series inverters are grid-tied inverters which convert DC current generated by PV modules into AC current and feed it into the public grid in three-phase. TL3-S series inverters are multi-string inverters with multi-MPP trackers, which mean they are able to connect to different PV module arrays.
Grid-tied PV system Overview:
Unpacking
Before opening the packing box of UE series inverter, please note that whether there are any visible external damages. Once open the packing box, please check the delivery for completeness and for any visible external damages of the inverter. If there are anything damaged or missing, please contact your dealer. Complete delivery should contain as follows.
Installation layout
Avoid exposing inverter to direct sunlight, rain or snow to extend the inverter service life despite the IP65protection degree. Exposure to the sunlight may cause additional internal heating which will cause power derating.
Common grid type
Based on the local GRID standards, it may select different connection types. In the following you will find an overview of the most common type of grid structure.